fix script

setup-audio.sh

@@ -26,14 +26,22 @@ if [ ! -f "$CONFIG" ]; then
     echo "Could not find $CONFIG" >&2
     exit 1
 fi
+FIRMWARE_DIR="$(dirname "$CONFIG")"
 
-OVERLAYS="/boot/firmware/overlays"
+# Ubuntu 25.10+ piboot-try layout sets "os_prefix=current/" (or similar) in
+# config.txt, and the firmware reads overlays from that prefix. Older layouts
+# (e.g. Ubuntu 24.04, Raspberry Pi OS) read directly from <firmware>/overlays.
+OS_PREFIX="$(awk -F= '/^[[:space:]]*os_prefix[[:space:]]*=/ { gsub(/[[:space:]]/,"",$2); print $2; exit }' "$CONFIG")"
+if [ -n "$OS_PREFIX" ]; then
+    OVERLAYS="${FIRMWARE_DIR}/${OS_PREFIX%/}/overlays"
+else
+    OVERLAYS="${FIRMWARE_DIR}/overlays"
+fi
 mkdir -p "$OVERLAYS"
 
 RESTORE_HELPER="/usr/local/sbin/barepi-audio-restore"
 RESTORE_SERVICE="/etc/systemd/system/barepi-audio-restore.service"
 MODULES_LOAD_FILE="/etc/modules-load.d/barepi-audio.conf"
-NEED_KERNEL_REBOOT=0
 
 have_audio_modules() {
     modinfo snd-soc-simple-card >/dev/null 2>&1 \
@@ -41,19 +49,10 @@ have_audio_modules() {
         && modinfo snd-soc-ics43432 >/dev/null 2>&1
 }
 
-install_pkg_if_available() {
-    local pkg="$1"
-    if apt-cache show "$pkg" >/dev/null 2>&1; then
-        apt-get install -y "$pkg"
-        return 0
-    fi
-    return 1
-}
-
 echo "=== barepi audio setup ==="
 echo "User: $TARGET_USER  Home: $TARGET_HOME"
 echo "Config: $CONFIG"
-echo "Overlays: $OVERLAYS"
+echo "Overlays: $OVERLAYS${OS_PREFIX:+ (os_prefix=$OS_PREFIX)}"
 echo ""
 
 # 1. Install packages
@@ -63,38 +62,23 @@ apt-get install -y alsa-utils libasound2-plugins swh-plugins i2c-tools device-tr
 
 if ! have_audio_modules; then
     KERNEL_MODULES_PKG="linux-modules-$(uname -r)"
-    if install_pkg_if_available "$KERNEL_MODULES_PKG"; then
+    if apt-cache show "$KERNEL_MODULES_PKG" >/dev/null 2>&1; then
+        apt-get install -y "$KERNEL_MODULES_PKG"
         echo "      Installed $KERNEL_MODULES_PKG"
     fi
 fi
 
-if ! have_audio_modules && [ -r /etc/os-release ]; then
-    . /etc/os-release
-    if [ "${ID:-}" = "ubuntu" ] && install_pkg_if_available linux-image-raspi-6.8; then
-        install_pkg_if_available linux-headers-raspi-6.8 || true
-        NEED_KERNEL_REBOOT=1
-        echo "      Installed Ubuntu raspi 6.8 kernel fallback for ASoC modules."
-    fi
-fi
-
 if ! have_audio_modules; then
-    if [ "$NEED_KERNEL_REBOOT" -eq 1 ]; then
-        echo "      Current kernel still lacks the required ASoC modules; continuing because a compatible kernel was installed." >&2
-        echo "      Reboot into the new kernel after setup completes." >&2
-    else
     echo "Missing required audio kernel modules: snd-soc-simple-card, snd-soc-tlv320aic31xx, snd-soc-ics43432" >&2
-        echo "Install a raspi kernel package that provides them, then rerun this script." >&2
+    echo "Install a kernel package that provides them (e.g. linux-modules-\$(uname -r)) and rerun." >&2
     exit 1
-    fi
 fi
 
 {
     echo "i2c-dev"
-    for mod in snd-soc-simple-card snd-soc-tlv320aic31xx snd-soc-ics43432; do
+    echo "snd-soc-simple-card"
-        if [ "$NEED_KERNEL_REBOOT" -eq 1 ] || modinfo "$mod" >/dev/null 2>&1; then
+    echo "snd-soc-tlv320aic31xx"
-            echo "$mod"
+    echo "snd-soc-ics43432"
-        fi
-    done
 } > "$MODULES_LOAD_FILE"
 
 modprobe i2c-dev || true
@@ -748,10 +732,7 @@ echo "=== Done ==="
 if [ "$CHANGED" -eq 1 ]; then
     echo "config.txt was modified."
 fi
-if [ "$NEED_KERNEL_REBOOT" -eq 1 ]; then
+echo "Reboot to load the updated overlay and audio module state."
-    echo "A compatible Ubuntu raspi kernel was installed."
-fi
-echo "Reboot to load the updated overlay and audio kernel/module state."
 echo "Speaker routing defaults and mic GPIO defaults will be restored automatically after boot."
 echo "Manual speaker check/adjust: $TARGET_HOME/volume.sh"
 echo "Manual mic test: $TARGET_HOME/test-mics.sh"